MC054V-RC IP65 MICROWAVE SENSOR 1-10V
Microwave Sensor 1-10V For Mounting To Side Of Luminaire
Sensors
Except the higher mounting height 15m Max. The sensors allow energy saving without compromising comfort. When used in combination with 0-10V dimmable LED drivers or ballasts, they can achieve 3-step dimming function, which is perfect for use in some areas that requires a light change notice before totally switch off.
Also, the 0-10V interface in the sensors can match up with Merrytek stand-alone daylight sensor MS01, and implement daylight harvesting, means the lighting system has automated controls that either turn off or dim artificial light in response to the available daylight in the space.
The sensor is designed for indoor use.
- Automatic dimming when used in combination with 0-10V dimmable LED drivers or ballasts.
- Built-in adjustable daylight sensor.0-10V interface can match up with Merrytek stand-alone daylight sensor MS01 and achieve daylight harvesting.
- Detection area, time delay and daylight threshold can be precisely set via DIP switch.
- Wide detection area, range up to 16m in diameter and mounting height 15M Max.
- suitable for high bay because of metal reflector clip.
- Dimming function or on off function
| Operating Voltage | 120-277Vac, 50/60HZ |
| Rated Load | 120Vac 4A electronic/magnetic ballast;277Vac 3A electronic/magnetic ballast |
| HF system | 5.8GHz±75MHz, ISM wave band |
| Power Consumption | ≤0.5W(standby), <1W(operation) |
| Transmitting Power | <0.5mW |
| Detection Zone Max. (DxH) | 16m x 15m |
| Motion Detection | 0.5~3m/s |
| Detection Angle | 150°(wall installation) 360°(ceiling installation) |
| IP Rating | IP65 |
| Operating Temperature | -35°C~70V°C |
| Hold Time | 5s/30s/90s/3min/20min/30min |
| Detection Sensitivity | 50% / 100% |
| Daylight Sensor | 50lux / 100lux / 200lux / Disable |
| Stand-by Period | 5s / 5min / 10min / 30min / 1h / Disable |
| Stand-by Dimming Level | 10% / 20% / 30%/ 50% |
| Life Time | 50,000 hours |
| Warranty | 5 years |
