Sensors - Light/Motion

Sensors - Light/Motion
larger imageMove mouse over the image to magnify

Motion Sensor: Dual Range

There are two different types of motion sensor in our range
1. The on/off sensors are used to turn the lights on for a set time (between 8sec-12min) when movement is detected.
2. The 0-10V sensors work directly with our dimable lights, perfect when turning the lights off is not an option. No movement keeps the lights at maximum dim, when movement is detected the lights immediately change to full brightness.
Both have selectable light level to optimise energy savings. Above the set light level, the lights will not change state on detection of movement. This feature is most suited in applications with high ambient light levels during the day, and can be disabled.


  • Light Setting: 0-500 lux
  • 360 degree detection
  • Range:1-18m adjustable
  • Power Consumption: 0.5W
  • Max Load: 1200W
  • Time Setting: 8 second-12 minute last movement detection

Light Level Sensors

This range of light level sensors offers an analogue output signal depending on the light level. Used to control dimming of lights these light level sensors make any smart relay or PLC that may already be in the plant or factory into a simple, intelligent lighting controller.
Our technical staff are able to assist with specific programs for smart relays to control the lights.


  • Supply Voltage: 24V
  • Output Signal: 0-10V or 4-20mA
  • Range: 0-2000lux

You might also be interested in ...