Spartan Linear - Zone 2 by Raytec
Zone 2 & 22 Fittings
LED Hazardous Area Linear Zone 2 Luminaire Standard and Emergency Variants
The SPARTAN Linear range is designed specifically for use in new hazardous area installations or to retrofit existing fluorescent installations which require high performance, reliable, White-Light illumination. Housed in Marine Grade aluminium and using Raytec’s field-proven, long-life LED technology, SPARTAN Linear is ATEX and IEC Ex approved for all Zone 2 applications and rated for T4, T5 and T6 environments (Zone 1 variants also available).SPARTAN Linear’s overall dimensions, fixing centres and gland entries are all compatible with commonly used traditional Ex n 2x18W fluorescent luminaires. The lumen output and light distribution also allows a direct, easy replacement of traditional fluorescent luminaires, meaning the customer can upgrade without complication and enjoy all the benefits of long life LED lighting while making regular lamp changes redundant.
SPARTAN Linear is available as an emergency variant, and standard variants can be converted to an emergency fitting at any time on-site, thanks to a unique modular design. This design also means key components can be easily accessed and serviced if required to make inspection and maintenance quicker and easier. SPARTAN Linear has a clear polycarbonate diffuser which is also available in various degrees of opaqueness to provide greater flexibility during installation.
SPARTAN uses thermal management technology, ensuring a much cooler LED operating temperature and up to 60% better heat dissipation compared to traditional lighting solutions, allowing the product to operate for > 10 years while still delivering a high lumen output of up to 3,400 lumens (SPZ-WL84) or 6,800 lumens (SPZ-WL168).
ATEX & IEC Ex approved – Zone 2 UL/CSA Approved, including CID2 ABS Approved- Zone 1 variant also available
- Retrofitable
- Emergency variants
- Ultra long life LED
- High lumen output LED
- Easy installation, maintenance and inspection
- Wide operating temperature range of -40° to +60°C
- Clear external tear off strips on outer optics available
- 5 year warranty
Ultra-Powerful
High lumen output – up to 3,400 lumensLatest high power LED technology.
Retrofitable
Easy Installation, matching the dimensions of traditional 2x18W fluorescent fittings, to provide an easy direct replacement Equivalent Output to a 2x18W fluorescent.
Ultra-Reliable
Industry leading 5 year warrantyDesigned and manufactured in the UK to the highest standards including both ISO9001 & ISO14001 Advanced electronics and LED’s protected by vibration resistant and waterproof potting compound.
Ultra-Modular
Both the LED and PSU modules are easily accessible for maintenance and inspection Available as a standard fitting only.
Ultra-Efficient
LEDs are thermally managed to deliver class leading energy efficiencySignificant running and maintenance savings compared to traditional lighting technologies
SMART access wiring system for safe and efficient installation, set-up and ongoing inspection.
Ultra-Support
Photometric files available (.ies & .ldt)Full Lighting Design Service
Site specific Energy and Cost Saving Report available.
|
|
LINEAR SPZ-WL84 |
LINEAR SPZ-WL84 EMERGENCY |
LINEAR SPZ-WL168 |
LINEAR SPZ-WL168 EMERGENCY |
|---|---|---|---|---|
|
CERTIFICATION |
||||
|
Atex Rating |
ATEX and IEC Ex rated for Gas & Dust | |||
|
Hazardous Area Rating |
Zone 2 - Gas & Dust | |||
|
Certificates |
CML15ATEX4138 & IEC Ex CML15.0068
L/CSA, including C1D2
|
|||
| Gas | II 3 G D nA mc IIC T4 or T5 Gc Ta= -40°C to +60°C (-20°C to +50°C emergency variants) II 3 G D nA mc IIC T6 Gc Ta= -40°C to +45°C (-20°C to +40°C emergency variants) |
|||
| Dust | Ex tc IIIC T80°C Dc IP66 & IP67 - Ta -40°C to +60°C (-20°C to +50°C emergency variants) |
|||
|
ELECTRICAL |
||||
| Input | 110-254V 50/60Hz AC only Low voltage option also available for standard variants only - 18/30V AC/DC |
|||
| Power | 34W | 37W | 68W | 71W |
| Termination | Incoming terminal block at each end suitable for looping and through wiring 4 core 4mm² cable | |||
| Power Factor | >0.95 | |||
| Cable Entries | 2xM20 cable entries at both ends, through wired as standard (other entries available upon request), dispatched complete with three ATEX/IEC Ex approved blanking plugs | |||
|
OPTICAL |
||||
| Lumen Output on Mains | Up to 3,400 lm | Up to 6,800 lm | ||
| LED Type | Platinum SMT LEDs | |||
| Number of LEDs | 84 LEDs | 168 LEDs | ||
| CRI | 70+ | |||
| Colour Temperature | 6,000K+ | |||
|
MECHANICAL / ENVIRONMENTAL |
||||
| Burning Position | Universal | |||
| IP Rating | IP66 & IP67 | |||
| Temperature Range | -40°C to +60°C | -20°C to +50°C | -40°C to +60°C | -20°C to +50°C |
| Weight | 6kg (13.2lbs) | 7kg (15.4lbs) | 9kg (19.8lbs) | 10kg (22lbs) |
| Enclosure | Marine grade aluminium epoxy powder coated, tough polycarbonate diffuser, all external fasteners and brackets are marine grade stainless steel | |||
| Unit Colour | Grey (RAL 7012) | Grey (RAL 7012) Red (RAL3024) - Emergency cover |
Grey (RAL 7012) | Grey (RAL 7012) Red (RAL3024) - Emergency cover |
| Installation Instructions | Raytec 920-M-0036 | |||
| Dimensions | 775x 108 x 174mm (30.5 x 4.3 x 6.9”) | 1295 x 108 x 174mm (51 x 4.3 x 6.9”) | 1414 x 108 x 174mm (55.7 x 4.3 x 6.9”) | |
| Mounting | Via M8 tapped holes. Various mounting arrangements available (please see product overview guide) SPX-BKT-CM = Spartan Ceiling Mounting Kit Stainless Steel SPX-BKT-SW = Spartan Wall Mounting Kit Stainless Steel 45° |
|||
|
EMERGENCY BATTERY BACK-UP |
||||
|
Battery |
- |
Ni/Cd 12V |
- |
Ni/Cd 12V |
|
Duration |
- |
Up to 3hrs @ 25% power Other options available |
- |
Up to 3hrs @ 25% power |
|
Charge Time |
- |
20 hours |
- |
20 hours |
WL84 Linear
WL168 Linear & Emergency
Document Downloads
 |
SPARTAN SPZ Linear
Zone 2/22 High Output Linear Luminaire
Edition: 001
|
|
|
SPZ-WL84_spec sheet
Spartan Linear Zone 2, Standard & Emergency WL84
Edition: 001
|
|
|
SPZ-WL168_spec sheet
Spartan Linear Zone 2, Standard & Emergency Variants WL168
Edition: 001
|
|
 |
SPZ-WL168_SDOC
Spartan Linear Zone 2, Standard & Emergency Variants
Edition: 001
|
|
 |
IES FILE
Contact us for IES files pertaining to this light
|
|
