PASSLIGHT | Wall Mounted Luminaires, 24W & 38W
Wall Pack Lights, Wall Pack Lights
The Thorlux Passlight Wall mounted luminaires are suitable for indoor or outdoor use. Die cast aluminium body and frame with polycarbonate or thermally shock resistant borosilicate glass cover. Optional photocell control and wire guard available. LED versions.
Applications
- Stairs
- Passageways
- Footpaths
- Subways
- Precincts
- Doors
- Gateways
- Security areas
- Industrial environments such as coal handling plants, cable tunnels, and security lighting
- Body and frame in strong pressure die-cast LM6M high corrosion resistance aluminium. Textured black full polyester powder finish
- Cover frame retained on two stainless steel safety chains
- Covers in prismatic polycarbonate or 9mm thick (nominal) thermally shock resistant borosilicate glass
- Aluminium gear tray with LED heat sink bar
- Fixings outside gasket line to preserve IP rating
- Clip-on nylon coated steel wire guard available
- Optional photocell control
- Tamper-resistant cover screws available
- Complies with M.O.D. JSP482 Chapter 8 Document for ‘Category C’ areas
- High power white LEDs
- Fitted with 4000K LEDs
- IP 65
| LED | CAT No. | APPROX. kg | |
|---|---|---|---|
| GLASS COVER | 24W | PL14898L | 6.6 |
| 38W | PL14900L | 6.6 | |
| POLYCARBONATE COVER | 24W | PL14897L | 4.4 |
| 38W | PL14899L | 4.4 | |
| LED RETRO-FIT GEAR TRAY | 24W | PL14930L | 1.6 |
| 38W | PL14931L | 1.6 |
CIRCUIT TYPE
L - non-dimming (LED)Document Downloads
 |
PASS LIGHT
24W & 38W Wall mounted luminaires
Edition: 001
|
|
